---
title: "Configuring Fault Type"
slug: "configuring-fault-type"
updated: 2025-12-23T11:54:09Z
published: 2025-12-23T11:58:49Z
canonical: "help.symphonysummitai.com/configuring-fault-type"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.symphonysummitai.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuring Fault Type

You can add and modify the various Fault Types for a Tenant. These Fault Types are available in the **Return Asset** section of the **RETURN FROM REPAIR** page.

To configure Fault Type, perform the following steps:

1. Select **Asset > Configuration** > **Asset Masters** > **Fault Type**.
2. On the **FAULT TYPE** page, click **ADD NEW** on the **ACTIONS** panel.
3. Select the **Tenant** and type in a name for the Fault Type in the **Fault Type** text box. If the **Active** check box is selected, the Fault Type becomes an available option on the other pages of the application.
4. Click **SUBMIT.** A new Fault Type is configured. ![](https://cdn.document360.io/62351b42-cfbd-43ad-8ce1-82b8f455337f/Images/Documentation/image-1XVPVE2V.png?sv=2026-02-06&spr=https&st=2026-11-07T19%3A02%3A21Z&se=2026-11-07T20%3A02%3A21Z&sr=c&sp=r&sig=UBt7UTcjkN7AEAfJcVehyTIyOsTgrGI1WyiJ1MVKlwI%3D) Figure: FAULT TYPE Details page

#### ACTIONS

This section explains all the icons displayed on the **ACTIONS** panel of the **FAULT TYPE** page.

**SHOW LIST**

Click **SHOW LIST** to display the **LIST** table showing all the Fault Types configured in the SUMMIT application for the selected Tenant. ![](https://cdn.document360.io/62351b42-cfbd-43ad-8ce1-82b8f455337f/Images/Documentation/image-HQSM1WRO.png?sv=2026-02-06&spr=https&st=2026-11-07T19%3A02%3A21Z&se=2026-11-07T20%3A02%3A21Z&sr=c&sp=r&sig=UBt7UTcjkN7AEAfJcVehyTIyOsTgrGI1WyiJ1MVKlwI%3D) Figure: FAULT TYPE List page:

- To edit a Fault Type, click the configured **Fault Type**. Make appropriate changes and click **SUBMIT**.

· To display the inactive Fault Types, click the **Include Inactive** check box.

Note:

When the Fault Types are displayed under the **LIST** table, the **ADD NEW** action is displayed on the **ACTIONS** panel. Click **ADD NEW** to add a new Fault Type.