--- title: "Hypervisor" slug: "hypervisor" status: "update" updated: 2026-11-17T17:03:57Z published: 2026-11-17T17:03:57Z canonical: "help.symphonysummitai.com/hypervisor" --- > ## Documentation Index > Fetch the complete documentation index at: https://help.symphonysummitai.com/llms.txt > Use this file to discover all available pages before exploring further. # Hypervisor Hypervisor credentials enable Discovery to connect to supported virtualization platforms and retrieve information about hypervisor hosts and virtual machines. The **Hypervisor Credentials** page supports the following credential types: | Credential Type | Supported Platform | Purpose | | --- | --- | --- | | [VMware](/apex/docs/hypervisor#vmware-credentials) | VMware vCenter Server and ESXi | Discovers VMware hosts and virtual machines. | | [Xen](/apex/docs/hypervisor#xencitrix-credential-fields) | XenServer, XCP-ng, and Citrix Hypervisor | Discovers Xen/Citrix hosts and virtual machines through XAPI. | | [Nutanix](/apex/docs/hypervisor#nutanix-credentials) | Nutanix Prism and AHV | Discovers Nutanix hosts and virtual machines through Nutanix Prism. | > [!NOTE] > Note > > Microsoft Hyper-V does not have a separate Hypervisor credential type. Create the credential under **Network > WMI**, and then run a **Network WMI** scan. The discovered Hyper-V hosts display under **Discovered Devices > Hypervisors**. ### VMware Credentials Use a VMware credential profile to connect to VMware vCenter Server for ESXi host and virtual machine discovery. ![Figure: VMware](https://cdn.document360.io/62351b42-cfbd-43ad-8ce1-82b8f455337f/Images/Documentation/hypervisor-image-yumz0cjg.png?sv=2026-02-06&spr=https&st=2026-11-20T22%3A03%3A53Z&se=2026-11-20T23%3A03%3A53Z&sr=b&sp=r&sig=llcczZKFpfjktF1XNhwgYe1qKi21no2owUCDiCM%2FpnU%3D) Figure: VMware #### Configure a VMware Credential Profile Create a VMware credential profile to allow Discovery to connect to VMware vCenter Server and retrieve ESXi host and virtual machine details. Perform the following steps to configure a VMware credential profile: 1. Select the **VMware** tab. 2. Select **New account**. 3. Select the required Department. 4. Enter a profile name. 5. Enter the vCenter username and password. 6. Use port 443, or enter the port configured for VMware vCenter Server. 7. Enable **Skip TLS verify** when you want to skip TLS certificate verification. 8. Enter the vCenter Server host name or IP address in **Test target host / IP**. 9. Select **Test Connection**. 10. After a successful connection test, select **Save Profile**. #### VMware Credential Fields | Field Name | Description | | --- | --- | | Department | Select the Department for which you want to create the credential profile. | | Profile Name | Enter a unique and descriptive name for the credential profile. For example, Production VMware. | | vCenter Username | Enter the username that has permission to connect to VMware vCenter Server. For example, administrator@vsphere.local. | | Password | Enter the password associated with the vCenter username. | | Port | Enter the port used to connect to VMware vCenter Server. The default port is 443. | | Skip TLS verify | Enable this option to skip TLS certificate verification when connecting to the target server. Enable this option when the target server uses a certificate that is not trusted or a self-signed certificate. | | Test target host / IP | Enter the host name or IP address of the VMware vCenter Server against which you want to test the credentials. | ### Xen/Citrix Credentials Use a Xen credential profile to connect to XenServer, XCP-ng, or Citrix Hypervisor through XAPI. ![Figure: Xen](https://cdn.document360.io/62351b42-cfbd-43ad-8ce1-82b8f455337f/Images/Documentation/hypervisor-image-sqfzssq6.png?sv=2026-02-06&spr=https&st=2026-11-20T22%3A03%3A53Z&se=2026-11-20T23%3A03%3A53Z&sr=b&sp=r&sig=dEFNgaJLiNWqFlYGk3NlVoXKjfTeWeFeiYsF5IQCfLk%3D) Figure: Xen #### Configure a Xen/Citrix Credential Profile Create a Xen/Citrix credential profile to allow Discovery to connect to XenServer, XCP-ng, or Citrix Hypervisor and retrieve host and virtual machine details. To configure a Xen/Citrix credential profile, perform the following steps: 1. Select the **Xen** tab. 2. Select **New account**. 3. Select the required Department. 4. Enter a profile name. 5. Enter the XAPI username and password. 6. Use port 443, or enter the port configured for the Xen/Citrix host. 7. Enable **Skip TLS verify** when you want to skip TLS certificate verification. 8. Enter the Xen/Citrix host name or IP address in **Test target host / IP**. 9. Select **Test Connection**. 10. After a successful connection test, select **Save Profile**. #### Xen/Citrix Credential Fields | Field Name | Description | | --- | --- | | Department | Select the Department for which you want to create the credential profile. | | Profile Name | Enter a unique and descriptive name for the credential profile. For example, Production Xen Hosts. | | XAPI Username | Enter the username that has permission to connect to XenServer, XCP-ng, or Citrix Hypervisor through XAPI. For example, root. | | Password | Enter the password associated with the XAPI username. | | Port | Enter the port used to connect to the Xen/Citrix host. The default port is 443. | | Skip TLS verify | Enable this option to skip TLS certificate verification when connecting to the target host. Enable this option when the target host uses a certificate that is not trusted or a self-signed certificate. | | Test target host / IP | Enter the host name or IP address of the XenServer, XCP-ng, or Citrix Hypervisor against which you want to test the credentials. | ### Nutanix Credentials Use a Nutanix credential profile to connect to Nutanix Prism for AHV host and virtual machine discovery. ![Figure: Nutanix](https://cdn.document360.io/62351b42-cfbd-43ad-8ce1-82b8f455337f/Images/Documentation/hypervisor-image-tg0lkjr9.png?sv=2026-02-06&spr=https&st=2026-11-20T22%3A03%3A53Z&se=2026-11-20T23%3A03%3A53Z&sr=b&sp=r&sig=36hAfe9zYZSwh3iNuyzWOC6Eg2cFxS1bznICQ3N6fsw%3D) Figure: Nutanix #### Configure a Nutanix Credential Profile Create a Nutanix credential profile to allow Discovery to connect to Nutanix Prism and retrieve AHV host and virtual machine details. Perform the following steps to configure a Nutanix credential profile: 1. Select the **Nutanix** tab. 2. Select **New account**. 3. Select the required Department. 4. Enter a profile name. 5. Enter the Prism username and password. 6. Use port 9440, or enter the port configured for Nutanix Prism. 7. Enable **Skip TLS verify** when you want to skip TLS certificate verification. 8. Enter the Nutanix Prism host name or IP address in **Test target host / IP**. 9. Select **Test Connection**. 10. After a successful connection test, select **Save Profile**. #### Nutanix Credential Fields | Field Name | Description | | --- | --- | | Department | Select the Department for which you want to create the credential profile. | | Profile Name | Enter a unique and descriptive name for the credential profile. For example, Production Nutanix Prism. | | Prism Username | Enter the username that has permission to connect to Nutanix Prism. For example, admin. | | Password | Enter the password associated with the Prism username. | | Port | Enter the port used to connect to Nutanix Prism. The default port is 9440. | | Skip TLS verify | Enable this option to skip TLS certificate verification when connecting to Nutanix Prism. Enable this option when Nutanix Prism uses a certificate that is not trusted or a self-signed certificate. | | Test target host / IP | Enter the host name or IP address of the Nutanix Prism instance against which you want to test the credentials. | ### Manage Hypervisor Credential Profiles The credential profile list displays the profiles configured for the selected hypervisor type. Select the **VMware**, **Xen**, or **Nutanix** tab to view and manage the corresponding credential profiles. - [List page](/apex/docs/hypervisor#list-page-actions) - [Active/Inactive Credential](/apex/docs/hypervisor#activate-or-deactivate-a-credential-profile) - [Edit Credential](/apex/docs/hypervisor#edit-a-credential-profile) - [Change History](/apex/docs/hypervisor#change-history-fields) #### Credential Profile List | Column | Description | | --- | --- | | Account Name | Displays the name assigned to the credential profile. | | Type | Displays the profile type, such as **VMware**, **Citrix/Xen**, or **Nutanix**. | | Username | Displays the username configured for the credential profile. A hyphen displays when the username is unavailable or hidden. | | Active Status | Indicates whether the credential profile is active. Use the toggle to activate or deactivate the profile. | | Last Updated | Displays the date and time when a user last updated the credential profile. Select the column heading to sort the profiles by the last updated date and time. | | Actions | Provides options to edit the credential profile or view its history. | ### Activate or Deactivate a Credential Profile Use the **Active Status** toggle to control whether Discovery can use the credential profile. - Turn on the toggle to activate the credential profile. - Turn off the toggle to deactivate the credential profile. A deactivated credential profile remains available in the list, but Discovery does not use the profile for future discovery operations. ### Edit a Credential Profile To edit a credential profile, perform the following steps: 1. Select the required hypervisor tab. 2. Locate the credential profile in the list. 3. Select the **Edit** icon under **Actions**. 4. Update the required details. 5. Enter or update the password when required. 6. Enter a host name or IP address in **Test target host / IP**. 7. Select **Test Connection** to test the updated credentials and connectivity. 8. Select **Save Profile**. ### View Credential Profile History The credential profile history provides a record of changes made to the selected profile. To view the credential profile history, perform the following steps: 1. Select the required hypervisor tab. 2. Locate the credential profile in the list. 3. Select the **History** icon under **Actions**. 4. Review the available history records. The history can include changes to the credential profile details and active status, along with the user and date and time associated with each change. #### Change History Fields The **Change history** page provides a read-only record of changes made to the selected credential profile. The newest changes display first, and secret values remain masked. | Field Name | Description | | --- | --- | | Field name | Displays the credential profile field users added or modified, such as **Department**, **Used for**, **Active**, or **Discovery Credential Name**. | | Old value | Displays the field value before the change. A hyphen (—) displays when no previous value exists. Secret values remain masked. | | New value | Displays the field value after the change. Secret values remain masked. | | Date changed | Displays the date and time when the change occurred. | | Changed by | Displays the identifier of the user who made the change. | Select **Close** to exit the **Change history** page and return to the credential profile list. ### List Page Actions | Action | Description | | --- | --- | | New account | Opens the credential profile form for the selected hypervisor type. | | Active Status | Activates or deactivates the credential profile. | | Edit | Opens the selected credential profile for modification. | | History | Displays the change history for the selected credential profile. |