--- title: "Crescendo SP1 Patch 2" slug: "crescendo-sp1-patch-2" updated: 2026-07-29T11:38:55Z published: 2026-07-29T11:38:55Z canonical: "help.symphonysummitai.com/crescendo-sp1-patch-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://help.symphonysummitai.com/llms.txt > Use this file to discover all available pages before exploring further. # Crescendo SP1 Patch 2 > [!NOTE] > Now Live! > > **Release Date | 17th April 2025** ## Fixed Issues The following are the issues fixed in Crescendo SP1 (6.3.1) Patch 2. | Issue ID | Issue Description | Scenario | Resolution | | --- | --- | --- | --- | | 168662 | Work Orders are not getting created, when the Work Orders are added as part of a Workflow. | **Steps:** 1. Create a new Workflow and provide all necessary details. 2. In the Design Flow, create a record labelled Workorder, which should be executed upon meeting a specific condition. | Workorders are getting created automatically for a Service Request, when a Work order is added as part of a Workflow for the respective Ticket. | | 168496 | While creating a Service Request workflow that includes a wait condition, the workflow did not function as expected after adding an 'If' condition. | **Steps**: 1. Create a new workflow and provide all the necessary details. 2. In the design flow, first create a record labeled **Workorder**, and within that Workorder, add two new statuses: "Valid" and "Not Valid." 3. After the record is added, configure a wait condition that checks whether the status is either "Valid" or "Not Valid." 4. Add an If condition to check if the status is "Valid." If the status is “Valid”, create a new record. If the status is "Not Valid," create an additional record. | While creating a Service Request workflow that includes a wait condition, the workflow is working as expected after adding an 'If' condition. | | 168241 | In the customer instance when users changed the Form Status of the below forms to Maintenance then an error toast message was displayed stating "*An error occurred while processing your request*". Module: Interaction Form: My Interaction Module: Service Request Form: Service Request Details form | **Steps**: 1. Log in to the Apex Application as an Application Designer. 2. Select **Service Management** Application. 3. Click settings icons and select **Design Studio**. 4. Navigate to **Service Request** Module > **Form Designer** > **Service Request Details** form. 5. Click **Publish** step and change the Status to **Maintenance**. 6. Observe for any error. > [!NOTE] > Note > > Repeat the above steps for My Interaction Form. | In the customer instance when user changes the Status of **Service Request Details** Form and **My Interactions** Form to **Maintenance** then no error is displayed. | | 169731 | The N**ew Sub Form** (Catalog Form) created for **Service Request** were not displayed on the list page and on the **New SR** list page. | **Steps**: 1. Log in to the application as an **Application Designer**. 2. Navigate to **Module** > **Service Request** > **Form Designer**. The Form Designer List page is displayed. 3. Click **New** to create a new record. 4. Select **Start from Scratch** to create a new form. 5. Enter all the required fields in **General**, **Design Form**, **Sequence Generator,** **Design List** **view**, and **Summary** steps. 6. In the **Publish** step, click **Published**. Verify that the created **Service Request** appears on the list page. | The **New Sub Form** (Catalog Form) created for **Service Request** are now displaying on the list page and on the **New SR l**ist page. | ## Known Issues The following are the known issues in Crescendo SP1 (6.3.1) Patch 2. | Issue ID | Issue Description | Scenario | Workaround | | --- | --- | --- | --- | | 77291 | Symptom/Description Text Disappears in Specific Scenarios. | **Steps:** 1. Navigate to **Incident > Manage incident**. 2. Click **New**. 3. Select the **Tenant**. 4. Copy paste the images to Symptoms and Description field. 5. Click on the **Maximize** icon. 6. Enter the text into the **Symptoms** and **Description** field. 7. Click on the **Edit** icon and verify the entered text. | N/A | | 76910 | Classification value is not getting retained for Resolved Incidents. | **Steps:** 1. Log in to application with your credentials. 2. Click on **Service Management** application. 3. Navigate to **Incident > My Incident**. 4. On the list page, select the **Resolved** Incident, 5. Verify the Classification. | N/A | | 77863 | When a workflow is configured on a Sub Form and the 'If' condition criteria are based on the Main Form, the 'No' flow is executed even when the condition is satisfied. | **Steps:** 1. Log into the Apex application as an App Designer. 2. Select the application as **Service Management** and **Module** as Incident. 3. Select the **Designer** as Workflow Designer. The **Workflow Designer list** page is displayed. Navigate to **Design Workflow** step. 4. Drag and drop ‘If’ condition component onto the designer canvas. Open the **Properties** popup and configure the condition criteria on **Manage Service Request** - Main Form. 5. Configure the **Create Record** components and connect it with If condition. Set up the following actions: If condition = Yes, create a Workorder. If condition = No, create an Incident. 6. Save and publish the workflow. 7. Navigate to **Manage Service Reques**t list page and click **New**. Raise an SR that matches the workflow conditions. 8. Verify that the If condition executes correctly for the Yes path. | N/A | | 77868 | The values of the **Operating System Version** field are not displayed in the other panels under **Asset Information** tab. | **Prerequisites:** 1. Asset must be displayed in **Instore**, **Allocated**, **Deactivate** and **Reactivate** status. 2. Template must be created successfully with all the Asset information. **Steps**: 1. Log into the application as an Analyst. 2. Click **Fixed**. 3. Click **New**. 4. Click **Choose from Template**. 5. Change the serial number. 6. Expand the **Others** panel under **Asset Information** tab. 7. Verify the **Operating System Version** dropdown value. | N/A | | 77773 | Alignment issue in the dropdown control on the consumer form. | **Prerequisites**: 1. Login to the Application. 2. Master Type and Master Value should be added with at least 50+ characters. **Steps**: 1. Log in to the Apex Application as an Application Designer. 2. Select **Service Management** Application. 3. Navigate to **Asset Management** > **Design Studio** > **Form Designer**. 4. Select any form. 5. Change the Status of the Form to **Maintenance** and navigate to **Design** form step. 6. Drag and drop the **Single Choice** control and configure the **Common Master** as a **Data Source**. 7. **Publish** the Form and Navigate to Consumer end of the form. 8. Go to **Asset Management**. 9. Select Form that is added with **Single Choice** control. Click on the dropdown field. | N/A | | 77870 | Analyst is unable to select a value on the **Source** field for some specific incidents. > [!NOTE] > Note > > This issue is occurring for Incidents that were created using the Apply Template. | **Steps**: 1. Log in to the Apex Application as an Application Designer. 2. Select **Service Management** Application. 3. Navigate to **Incident** > **Manage Incidents**. Manage Incident List page is displayed. 4. Click **New** to create an Incident. 5. Click vertical ellipsis on the top right and select **Apply Template**. 6. Select **Template** and click **Apply**. 7. **Save** the Incident. 8. Select the same **Incident** on the List page Select value from the dropdown in **Source** field. | N/A | | 77601 | Selected multi choice values are not displayed under multi valued group after the creation of **Service Request**. | **Prerequisite**: Add multi valued group in the multi choice drop - down in the **Catalog Form**. **Steps**: 1. Log in to the Apex application as an Analyst. 2. Select **Service Management** application. 3. Navigate to **Service Request** > **My Service Request**. The **My Service Request List** page is displayed. 4. Select the **Catalog Form** which has the multi valued group and multi choice created. 5. Enter all the mandatory fields and add Multichoice values. Click **Save**. The Service Request is created. 6. Navigate to Service Request Details page and verify the result. | N/A | | 77600 | The configured Workflow on a Sub Form that is further with configured with Create Record functionality, is not working as expected. Record is not created after workflow initiation. | **Prerequisites:** 1. Workflow should be configured on Sub Form (VPN Access). 2. App Designer should be on the Design Workflow step. **Steps:** 1. Drag and drop **User Approval** component and configure it. 2. Drag and drop **Create Record** component and configure it with the below attributes, **Module**: Workorder **Form Type**: Sub Form **Form**: New Joinee Laptop Allocation. 3. Click **Save** and publish the Workflow. 4. Create a record that match to the above workflow Conditions. 5. Complete the workflow. Verify if the record is created. | N/A | | 77672 | Text input lag occurs in the Symptom and Description text fields while typing. | **Steps**: 1. Log in to the Apex application as an **Analyst**. 2. Navigate to **Incident > Manage Incidents**. 3. Click **New** to create a new **Incident**. 4. Enter the required details with details in the **Symptom** and **Description** text fields. | N/A | | 77801 | After configuring and saving the **Set Value** component, if you navigate back to the **Properties** popup, the dropdown fields do not retain the previously selected values. | **Prerequisites:** 1. Configure the workflow on the Sub Form (VPN Access). 2. App Designer should be on the **Design Workflow** step. **Steps:** 1. Log in to the application as an App Designer. 2. Navigate to **Module** > **Incident** > **Designers** > **Workflow Designer**. The **Workflow Designer** list page is displayed. 3. Click **New** to create a new workflow. 4. In the **General**, enter all the required fields. 5. In the **Design Workflow** step, Drag and drop Set Value component on to Designer canvas. 6. Navigate to **Properties** popup. Configure **Status**, **Resolution**, **Closure Code**, **Solution**, and **Closure category** fields. 7. Save the **Set value** component. 8. Navigate to **Set value** properties popup. 9. Verify the values are retained for all the fields. | N/A | | 77877 | When you configure the Workflow on the **Sub Form** with **Wait for Condition** at the beginning, it triggers from the start again even after completion. | **Prerequisite:** Configure the workflow on the Sub Form (VPN Access). **Steps:** 1. Log in to the application as an App Designer. 2. Navigate to **Module** > **Incident** > **Designers** > **Workflow Designer**. The **Workflow Designer** list page is displayed. 3. Click **New** to create a new workflow. 4. In the **General** step, enter all the required fields. 5. Navigate to the **Design Workflow** step. 6. Drag and drop **Wait For Condition** component and drop it onto the designer canvas. 7. Open the **Properties** popup. 8. Configure the condition criteria on Main Form (Manage Service Request). 9. Add an If condition with criteria on Main Form (Manage Service Request) 10. Configure the **Create Record** component. 11. Select **Save** and **Publish** the workflow. 12. Navigate to **Manage Service Request** list page and select **New**. 13. Create a Record that matches the workflow conditions. 14. Complete the **Workflow**. 15. After the Workflow completes, check whether it has terminated. | N/A | ##