Crescendo 6.3.1.1 Patch 8

175384

The Message tab in User Communication displayed only the 10 most recent records, with identical details available in the change history.

Steps:

1. Log in to the Apex Application as an Analyst.
   

2. Navigate to Incident > Manage Incidents.
   The Manage Incidents List page is displayed.
   

3. Click Incident ID hyperlink and click Messages tab.
   

4. Verify that all messages are displayed. The total number of messages should exceed 10.

All messages are displayed correctly, and there are no scrolling issues in the User Communication tab.

175210

The Major Incident pop-up page was not appearing on toggle of Major Incident switch.

Steps:

1. Log into the application as an Analyst.
   

2. Navigate to Incident > Incident > Manage Incidents. The Manage Incidents page is displayed.
   

3. Click the Major Incident toggle Switch to mark the incident as Major incident.

The Major Incident pop-up page is appearing on toggle of Major Incident switch.

84144

Users are not able to create the duplicate Priority Matrix.

Steps:

1. Login to the application as an Application Designer.

2. Select Service Management application.

3. Click on settings icon and select the Module as Problem.

4. Navigate to Configuration > Priority Matrix.

5. Select already existing field value for the Impact, Urgency, Priority fields.

6. Verify the Priority Matrix configuration.

NA

79411

User is not able to save the Target Form created through Form Relation when multiple files are attached in the Source Form.

Steps:

1. Login to the application as an Analyst.

2. Navigate to Service Management > Incidents > Manage Incidents.

3. Click New button on the list page.

4. Fill all the mandatory details.

5. Upload the file in Attachment field.

6. Click on Save button.

7. Access the same created by clicking on ID hyperlink.

8. Navigate to Links tab and click on Create button and select the module for which form relation is configured (Example: INC to SR.)

9. Verify the uploaded file in Attachment field.

10. Click Save button and verify whether user can save the Target Form (SR).

11. Verify the toast message.

NA

79372

Users are experiencing alignment issue in the Create tab of Links tab in the Form Designer.

Steps:

1. Log in to the application as an Application Designer.

2. Navigate to Service Management > Design Studio > Select Module as Incident > Form Designer.

3. Select Manage Incidents form and place the form in Maintenance.

4. Navigate to Design Form step.

5. Click on the gear icon of Links tab.

6. Click on Create tab and verify the alignment of add icon '+'.

NA

171982

The Problem Record status is not reflected on the linked Incident or Service Request, and the Parent-Child option is missing in the Link popup.

Steps:

1. Log in to Apex application.

2. Select Service Management application.  

3. Navigate Problem > Manage Problem Record. The Manage Problem Record List page is displayed.

4. Click existing PR ID and navigate to Links tab.

5. Select Incident or SR. The Link pop-up appears.

6. In the pop-up, select the Parent-Child relationship from the dropdown.

NA

79887

The Define Conditions step in the Notification Parser displays UI alignment inconsistencies and text translation issues after configuring line forms and define keys.

Steps:

1. Log in to the Apex application.

2. Navigate to Settings > Design Studio > Application > Notification Parser. The Notification Parser List is displayed.

3. Click New and fill in all mandatory fields.

4. Navigate to the Parser Content step. Fill in all required Line Form entries.

5. To add or update form data, select the relevant line form and configure the Define Keys.

6. Select Define Conditions step.

N/A

78560

Only one email was converted into a ticket. The remaining emails were not processed or converted.

Prerequisites:

1. API Configuration is set up

2. Mailbox is configured correctly

3. Notification Parser is configured

Steps:

1. Log in to the application as an Admin.

2. Navigate to Design Studio > Application > Scheduler.

3. Filter and locate the Scheduler configured during Mailbox setup.

4. Click Scheduler run immediately and refresh until the job displays Success.

5. Login as an Analyst.

6. Navigate to Manage Incident List page.

7. Verify if the tickets are created for all sent emails.

N/A

79604

In the Notification Parser, a warning message for mandatory values displays even though all values are entered.

Prerequisite:

A Filter is configured in the Define Condition step under Parser Content, where the User-Defined Key is set to Symptom, the Operator is Set to contains, and the value is set to Automation.

Steps:

1. Log in to the application as an Application Designer.
   

2. Navigate to Application Tile > Notification Parser.
   

3. Click the ID hyperlink of Mail to Incident parser from the list.
   

4. Click Parser Content step and delete all the Line Form entries that were previously added.
   

5. Observe that the filter in Define Conditions remains and click Next.

N/A

79461

In the Mailbox Configuration, the warning message 'You have not entered all mandatory value(s).' displays even though all mandatory values are provided in the mail to create a ticket using the API.

Steps:

1. Log in to the application as an Application Designer.
   

2. Navigate to Application Tile > Mailbox Configuration.
   

3. Click New and enter the required details. Click Next in the Configuration and Rules steps.

N/A

79328

The value is not getting binded for ‘Tree View’ control.

Steps:

1. Log in to the application as an End User.

2. Navigate to My Incidents and raise an incident.

3. Log in to the application as an Analyst.

4. Click on the above-created Incident ID hyperlink. The Incident Details page is displayed.

5. Observe the value for Category field.

N/A

79412

On the Manage Incidents – Details page, a field-level inline message displays when the user uploads multiple files one after another in the Attachment control. However, the inline message does not display when the user uploads multiple files simultaneously.

Steps:

1. Login to the application as an Analyst.
   

2. Navigate to Service Management > Incidents > Manage Incidents.
   The Manage Incidents - List page is displayed.
   

3. Click New from the Manage Incidents - List page.
   

4. Enter the required details and attach the file in Attachment field one by one with file up to 24MB.
   

5. Verify the field level inline which will be displayed.

N/A

87498

On clicking View Relationship Details in the Additional Details section of the Configuration Item details page, the CI Info field in the relationship pop-up does not contain a hyperlink.

Steps:

1. Log in to the application as an Analyst.
   

2. Navigate to CMDB > Manage Configuration Item > Configuration Item List.
   

3. Click CI NO hyperlink to view the Configuration Item.
   

4. Click Relationship from Left panel.
   

5. Click any of the CI and click 'View Relationship Details' in the additional details pop up page.

N/A

87505

On clicking View Relationship Details in the Additional Details section of the Configuration Item details page, the Service Info field (CI Service Relationship which is linked to the Service) in the relationship pop-up does not contain a hyperlink.

Steps:

1. Log in to the application as an Analyst.
   

2. Navigate to CMDB > Manage Configuration Item > Configuration Item List.
   

3. Click CI NO hyperlink to view the Configuration Item.
   

4. Click CI Service Relationship from Left panel.
   

5. Click any of the Service Info and click 'View Relationship Details' in the additional details pop up page.

N/A