Define Condition
  • 16 Sep 2024
  • 1 Minute to read
  • PDF

Define Condition

  • PDF

Article summary

Pre-requisites

Configure User Defined Keys. For more information, refer to Define Keys.

Define Condition

For the User Defined Keys, you can Define Conditions. However, this step is not mandatory.

To define the conditions for Keys, perform the following steps:

  1. Select Define Conditions tab and click +Add Filter Set.

    Figure: Define Conditions

  2.  Select User Defined Keys, Operator from the dropdowns and enter a Value.
     Figure: Define Condition - Condition Builder

  3. Select configured UDK, chose appropriate Operator and enter the Value.

    List of Operators

    • Contain

    • Does not Contain

    • Equals

    • Not Equals

    • Greater than

    • Less Than

    • Greater than or Equals

    • Less than or Equals

    • Starts With

    • Ends With

    Defined Condition displays as below, allowing the Application Designer to further add more field sets or delete the configured set.

    Figure: Define Conditions

    Icon

    Description

    Click Delete icon to remove the field set in the Define Condition tab.

    Click Add icon to insert a new field set in the Define Condition tab.

  4. Select UDKs and click Group to join the field.
    Figure: Grouping Conditions  

  5. Select AND/OR operators to build the condition.
     Figure: Login builder

  6.  Click Next to navigate to Actions stepper or Cancel to return to the List page.


Was this article helpful?

What's Next
Changing your password will log you out immediately. Use the new password to log back in.
First name must have atleast 2 characters. Numbers and special characters are not allowed.
Last name must have atleast 1 characters. Numbers and special characters are not allowed.
Enter a valid email
Enter a valid password
Your profile has been successfully updated.