Vendor MIBs
- 30 Jul 2025
- 2 Minutes to read
- Print
- PDF
Vendor MIBs
- Updated on 30 Jul 2025
- 2 Minutes to read
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
You can configure vendor specific MIB OIDs. Management Information Base (MIB) is a virtual database used for managing the entities while monitoring LAN/WAN network. It is associated with the Simple Network Management Protocol (SNMP). Object Identifiers (OIDs) refer to the nodes in the MIB hierarchy.
Configure Vendor MIBs
To configure Vendor MIBs, perform the following steps:
Select Admin > Advanced > Discovery & Monitoring > Vendor MIBs.
Figure: Vendor MIB
On the Vendor MIB page, specify the required details. For more information about the fields on the Vendor MIB page, see, Field Description.
Figure: Vendor MIB page
Click Submit.
Field Description
The following table describes the fields on the Vendor MIB page.
Fields | Description |
Vendor | Lists the configured vendor names. Select a vendor name from the Vendor list. |
IOS | Lists all the Vendor device’s IOS. Select the Vendor device’s IOS from the list. |
Monitor Type | Lists the supported monitor types. Select the Monitor Type from the list. |
MIB Type | Lists the MIB types as:
Select any one option from the list box. If you select Formula option, you must type in the values in any of the two fields Used MIB OID, Free MIB OID, and Total MIB OID. If you select Static option, you must type in the value for Used MIB OID. |
Used MIBOID | Type in OID for Used MIB. Note: It is mandatory to type in Used MIB OID, for Static MIB Type. |
Free MIBOID | Type in OID for Free MIB. |
Total MIBOID | Type in OID for total MIB. |
MIB Used | Displays the MIB Used values: |
Device Type | Lists the device types. Select the device type from the list. |
Sort Order | Type in the sequence number to indicate the position of the Vendor MIB OID in the list |
Active | Indicates the status set for a Vendor MIB OID.
|
Actions
This section explains all the icons displayed on the right-side panel of the VENDOR MIB OIDS SETTINGS page.
Show List
Click Show List to display the LIST table showing all the configured vendor MIBs.
Figure: VENDOR MIB List Page
To edit a vendor MIB, click ID hyperlink. Make appropriate changes and click Submit.
· To display the inactive Vendor MIB configurations, click the Include Inactive check box.
Note
When the Vendor MIB configurations are displayed under the LIST table, the Add New action is displayed on the right-side panel. Click Add New to configure a new Vendor MIB configuration.
Was this article helpful?