Hypervisor

Prev Next

Hypervisor credentials enable Discovery to connect to supported virtualization platforms and retrieve information about hypervisor hosts and virtual machines.

The Hypervisor Credentials page supports the following credential types:

Credential Type

Supported Platform

Purpose

VMware

VMware vCenter Server and ESXi

Discovers VMware hosts and virtual machines.

Xen

XenServer, XCP-ng, and Citrix Hypervisor

Discovers Xen/Citrix hosts and virtual machines through XAPI.

Nutanix

Nutanix Prism and AHV

Discovers Nutanix hosts and virtual machines through Nutanix Prism.

Note

Microsoft Hyper-V does not have a separate Hypervisor credential type. Create the credential under Network > WMI, and then run a Network WMI scan. The discovered Hyper-V hosts display under Discovered Devices > Hypervisors.

VMware Credentials

Use a VMware credential profile to connect to VMware vCenter Server for ESXi host and virtual machine discovery.

Figure: VMware

Figure: VMware

Configure a VMware Credential Profile

Create a VMware credential profile to allow Discovery to connect to VMware vCenter Server and retrieve ESXi host and virtual machine details.

Perform the following steps to configure a VMware credential profile:

  1. Select the VMware tab.

  2. Select New account.

  3. Select the required Department.

  4. Enter a profile name.

  5. Enter the vCenter username and password.

  6. Use port 443, or enter the port configured for VMware vCenter Server.

  7. Enable Skip TLS verify when you want to skip TLS certificate verification.

  8. Enter the vCenter Server host name or IP address in Test target host / IP.

  9. Select Test Connection.

  10. After a successful connection test, select Save Profile.

VMware Credential Fields

Field Name

Description

Department

Select the Department for which you want to create the credential profile.

Profile Name

Enter a unique and descriptive name for the credential profile. For example, Production VMware.

vCenter Username

Enter the username that has permission to connect to VMware vCenter Server. For example, administrator@vsphere.local.

Password

Enter the password associated with the vCenter username.

Port

Enter the port used to connect to VMware vCenter Server. The default port is 443.

Skip TLS verify

Enable this option to skip TLS certificate verification when connecting to the target server. Enable this option when the target server uses a certificate that is not trusted or a self-signed certificate.

Test target host / IP

Enter the host name or IP address of the VMware vCenter Server against which you want to test the credentials.

Xen/Citrix Credentials

Use a Xen credential profile to connect to XenServer, XCP-ng, or Citrix Hypervisor through XAPI.

Figure: Xen

Figure: Xen

Configure a Xen/Citrix Credential Profile

Create a Xen/Citrix credential profile to allow Discovery to connect to XenServer, XCP-ng, or Citrix Hypervisor and retrieve host and virtual machine details.

To configure a Xen/Citrix credential profile, perform the following steps:

  1. Select the Xen tab.

  2. Select New account.

  3. Select the required Department.

  4. Enter a profile name.

  5. Enter the XAPI username and password.

  6. Use port 443, or enter the port configured for the Xen/Citrix host.

  7. Enable Skip TLS verify when you want to skip TLS certificate verification.

  8. Enter the Xen/Citrix host name or IP address in Test target host / IP.

  9. Select Test Connection.

  10. After a successful connection test, select Save Profile.

Xen/Citrix Credential Fields

Field Name

Description

Department

Select the Department for which you want to create the credential profile.

Profile Name

Enter a unique and descriptive name for the credential profile. For example, Production Xen Hosts.

XAPI Username

Enter the username that has permission to connect to XenServer, XCP-ng, or Citrix Hypervisor through XAPI. For example, root.

Password

Enter the password associated with the XAPI username.

Port

Enter the port used to connect to the Xen/Citrix host. The default port is 443.

Skip TLS verify

Enable this option to skip TLS certificate verification when connecting to the target host. Enable this option when the target host uses a certificate that is not trusted or a self-signed certificate.

Test target host / IP

Enter the host name or IP address of the XenServer, XCP-ng, or Citrix Hypervisor against which you want to test the credentials.

Nutanix Credentials

Use a Nutanix credential profile to connect to Nutanix Prism for AHV host and virtual machine discovery.

Figure: Nutanix

Figure: Nutanix

Configure a Nutanix Credential Profile

Create a Nutanix credential profile to allow Discovery to connect to Nutanix Prism and retrieve AHV host and virtual machine details.

Perform the following steps to configure a Nutanix credential profile:

  1. Select the Nutanix tab.

  2. Select New account.

  3. Select the required Department.

  4. Enter a profile name.

  5. Enter the Prism username and password.

  6. Use port 9440, or enter the port configured for Nutanix Prism.

  7. Enable Skip TLS verify when you want to skip TLS certificate verification.

  8. Enter the Nutanix Prism host name or IP address in Test target host / IP.

  9. Select Test Connection.

  10. After a successful connection test, select Save Profile.

Nutanix Credential Fields

Field Name

Description

Department

Select the Department for which you want to create the credential profile.

Profile Name

Enter a unique and descriptive name for the credential profile. For example, Production Nutanix Prism.

Prism Username

Enter the username that has permission to connect to Nutanix Prism. For example, admin.

Password

Enter the password associated with the Prism username.

Port

Enter the port used to connect to Nutanix Prism. The default port is 9440.

Skip TLS verify

Enable this option to skip TLS certificate verification when connecting to Nutanix Prism. Enable this option when Nutanix Prism uses a certificate that is not trusted or a self-signed certificate.

Test target host / IP

Enter the host name or IP address of the Nutanix Prism instance against which you want to test the credentials.

Manage Hypervisor Credential Profiles

The credential profile list displays the profiles configured for the selected hypervisor type. Select the VMware, Xen, or Nutanix tab to view and manage the corresponding credential profiles.

Credential Profile List

Column

Description

Account Name

Displays the name assigned to the credential profile.

Type

Displays the profile type, such as VMware, Citrix/Xen, or Nutanix.

Username

Displays the username configured for the credential profile. A hyphen displays when the username is unavailable or hidden.

Active Status

Indicates whether the credential profile is active. Use the toggle to activate or deactivate the profile.

Last Updated

Displays the date and time when a user last updated the credential profile. Select the column heading to sort the profiles by the last updated date and time.

Actions

Provides options to edit the credential profile or view its history.

Activate or Deactivate a Credential Profile

Use the Active Status toggle to control whether Discovery can use the credential profile.

  • Turn on the toggle to activate the credential profile.

  • Turn off the toggle to deactivate the credential profile.

A deactivated credential profile remains available in the list, but Discovery does not use the profile for future discovery operations.

Edit a Credential Profile

To edit a credential profile, perform the following steps:

  1. Select the required hypervisor tab.

  2. Locate the credential profile in the list.

  3. Select the Edit icon under Actions.

  4. Update the required details.

  5. Enter or update the password when required.

  6. Enter a host name or IP address in Test target host / IP.

  7. Select Test Connection to test the updated credentials and connectivity.

  8. Select Save Profile.

View Credential Profile History

The credential profile history provides a record of changes made to the selected profile.

To view the credential profile history, perform the following steps:

  1. Select the required hypervisor tab.

  2. Locate the credential profile in the list.

  3. Select the History icon under Actions.

  4. Review the available history records.

The history can include changes to the credential profile details and active status, along with the user and date and time associated with each change.

Change History Fields

The Change history page provides a read-only record of changes made to the selected credential profile. The newest changes display first, and secret values remain masked.

Field Name

Description

Field name

Displays the credential profile field users added or modified, such as Department, Used for, Active, or Discovery Credential Name.

Old value

Displays the field value before the change. A hyphen (—) displays when no previous value exists. Secret values remain masked.

New value

Displays the field value after the change. Secret values remain masked.

Date changed

Displays the date and time when the change occurred.

Changed by

Displays the identifier of the user who made the change.

Select Close to exit the Change history page and return to the credential profile list.

List Page Actions

Action

Description

New account

Opens the credential profile form for the selected hypervisor type.

Active Status

Activates or deactivates the credential profile.

Edit

Opens the selected credential profile for modification.

History

Displays the change history for the selected credential profile.